How to use FitCloudPro App Instructions?

In this blog post, you’ll read:How to use Fitcloudpro APP instructions?

How to pair your smartwatches in FitcloudPro App?

Watch connects to Phone, download the App “FitCloudPro” in the Phone at very first, reference following 2 methods:

  1. Android/iOS Phone: Scan following QR code image by browsers or by any Scanner to Download.
  1. 2.Android Phone: search and download “FitCloudPro” app from Google Play; iOS phone: search and download “FitCloudPro” app from Apps Store;


After installation, turn on the phone Bluetooth and FitCloudPro App, confirm the notifications and all others permission “FitCloudPro” asks are enabled, and fill up personal information. Tap “Add device”, search “Watch 7” device (turn on the GPS in the smartphone before binding) and tap connect.
 
How to set the notification reminder: In “FitCloudPro” – Device – Notifications, select the corresponding Apps, turn ON the switch.
What should I do if I don’t receive the notifications?
1. The watch’s notification only synchronous phone notifications from the notification center, such as incoming calls, SMS, WhatsApp, WeChat, etc., if the phone doesn’t receive notifications in the notification center, then the watch cannot receive them either, it must set as phone able to receive notifications of the corresponding Apps, turn ON the notification permission in phone setting.
2. If still not receiving any notification after step (1). Reset the watch to factory setting, enter the Bluetooth settings in the phone, and check if the connected device has “Watch 7”. If so, please unpair, turn OFF the phone’s Bluetooth, then turn it ON again to reconnect.
3. If all the above 2 steps cannot solve the notification issue, uninstall the “FitCloudPro” and download it again. Remember agree all permissions App asks when the installation is done and very beginning turn the App on, and then reconnect again.
 
Firmware upgrade: As Bluetooth connected, in “FitCloudPro”, Tap “Device- “Firmware version”- it will remind you if there’s a new version available for update. During the updating, it will show a process bar, wait for it until complete. Watch will restart and reconnect the phone App. Do not operate the watch during the update. It takes 3-5 mins.
 
Main Features:

Call:
This device supports Bluetooth calls, and the watch controls the phone to make or receive calls. Tap the Bluetooth call icon in the drop-down menu, in phone-Settings-Bluetooth-search for “Watch7-LE” and connect to watch. In order to reduce the power consumption, after the audio Bluetooth is disconnected from a long distance, if there is no reconnection within 2 minutes, it will be automatically turned off, and it needs to be turned on manually. The Bluetooth call audio can be turned off, then the watch cannot make or receive Bluetooth calls, and the low power consumption mode is turned on by default, which can extend the use time.

Phonebook:
After connecting to the phone App, you can add 10 frequently used contacts to the watch phonebook from the App.
● Language/Time/Date:
Synchronizing of language/date/time between the mobile phone and the SmartWatch after being connected
● Standby watch faces: There are a couple of watches faces for options, long press 3 seconds at home screen to switch different watch faces; also allows download new watch faces in the App; it is able to customize your photos as watch face background.
● Notifications:
Synchronizing and display of app notifications such as Facebook, WhatsApp, SMS, Email, etc., between the mobile phone and the SmartWatch. Up to 8 notifications can be displayed on the watch. Please adjust the settings in the Fundo app and allow notifications to be displayed (app permissions). It is able to decline incoming calls via the watch.
● Activity info:
Showing the workout and health data including Steps, Distance, Calorie consumption. This data will be saved until midnight (12:00 am) every day and then reset to 0 values for the coming day. You can look up previous data in History.
● Exercise:
Select a sport mode to record your workout. Enter to start the activity, slide right to pause the workout, tap to end the workout. It records the duration, calories, heart rate, etc.
Health:
Heart Rate Monitoring Function:
When this function is activated, the heart rate is being measured by the device scanning the surface capillary of the skin with green optical diodes. Please allow for about 2 seconds to start measuring and recording. Slide to other menus to stop measuring. Please refer to information about average heart rate, heart rate while exercising for your age group and gender online and/or ask your medical practitioner for advice.
 
Please note: The device is not a medical device. Any values shown are for reference only.
Blood Pressure Function:
Please put your hands flat on a surface and do not move. When this function is activated, it needs about 45 – 50 seconds of measuring and reading to provide a result
 
Please note: The device is not a medical device. Any values shown are for reference only.
Electrocardiogram (ECG) Function:
The device combines an optical heart rate sensor and ECG sensor to show information about the user’s heart function for reference. When this function is activated it needs about 30 seconds of measuring and reading to provide a result at the App to review.
 
Please note: The device is not a medical device. Any values shown are for reference only.
 
Blood Oxygen Function:
Blood oxygen (SP02H) level is the amount of oxygen circulating in the blood. Please refer to information about healthy or abnormal blood oxygen percentage for your age group and gender online and/or ask your medical practitioner for advice.
 
Please note: The device is not a medical device. Any values shown are for reference only.
● Sleep monitor: 
Sleep monitoring will be automatically active from 9:30 pm to 12:00 pm the next day. You can check the details of sleep quality with the app on the phone.
● Stopwatch Function:
Press the start and pause, again press for stop.
● Remote Control (Music):
Allows to activate and control music playback on the phone via the Smart Watch (a music playback app should be installed on the phone).
About: Check model number, Bluetooth address, version number
Reset: Tap to reset all data (factory mode).
Alarm Function: You can set several alarm times via the Fundo app on the phone.
Sedentary, drink reminder: Via the App set a time for exercise and/or a reminder to drink.
Find Phone Function: As the device and phone are connected, the Find Phone Function can support locating your mobile phone. Tap “Find Phone” and locate your phone via the ringtone/sound coming from your phone.
Wrist Wakeup: You can “wake up” the watch with wrist movement. Please set this function with the app. Please note that this might increase power consumption.
                         
 
Warranty Details
The manufacturer/distributor warrants the product to be free from defects in workmanship for a period of 12 months from the date of purchase. Defects that will occur under normal use and care will be compensated, replaced, or refunded at our discretion.
 
Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket, tax invoice, or receipt as the best proof of purchase, and as proof of the date on which the purchase was made.
 
IMEI code:
Buy store:
Customer signature:
Signature of Shop Assistant:
Shop Stamp:
 
Extent of Warranty
This warranty only covers defects in workmanship or parts. All defective products or parts will be repaired or replaced. This warranty does not cover batteries or any other consumable items.
 
Normal Wear and Tear
Normal wear and tear of the product or parts of the product are not covered by this warranty.
 
Not Included in the Warranty Terms
This warranty does not include:
 
• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering, or attempted repair by a person not authorized by the distributor.
• Any product that has not been installed, operated, or maintained in accordance with the manufacturer‘s instruction manual provided with the product.
• Any product that has been used for purposes other than the intended use.
• Any damage caused by improper power input or improper cable connection.